Fused Clapton - 3 Styles - Riffy Designs

$9.99

FUSED CLAPTON 1 - Two 26 gauge Ni80 wires fused together with 38 gauge Ni80. Five wraps around a 3mm jig ohms out at approximately 0.12 ohms installed as a dual...

FUSED CLAPTON 1 - Two 26 gauge Ni80 wires fused together with 38 gauge Ni80. Five wraps around a 3mm jig ohms out at approximately 0.12 ohms installed as a dual coil**. Great basic build for high wattage devices and mechanical mods. For those who like a hotter build.

Suggested wattage 70 to 120w*.

FUSED CLAPTON 2 - Two 28 gauge Nichrome 80 wires fused together with 38 gauge Nichrome 80. Six wraps around a 3mm jig ohms out at approximately 0.23 ohms installed as a dual coil**. Great basic build for mid range wattage. Works well with RTAs with space for 3mm coils.

Suggested wattage 45w to 75w*.

FUSED CLAPTON 3 - Two 28 gauge stainless steel wires fused together with 38 gauge Nichrome 80. Six wraps around a 3mm jig ohms out at approximately 0.18 ohms installed as a dual coil**. Although basic build with lower ohms, it can be vaped at lower wattage to allow for a cooler yet still dense vape.

Works well with RTAs that have space for 3mm coils.
Suggested wattage 35 to 75w*.

Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks. Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.