Wotofo Warrior RDA

$39.99

Wotofo, in collaboration with JMT Elite presents the Warrior 25mm Bottom Fed RDA, a clamp style, two post build deck rebuildable atomizer with four top-mounted Phillips screws, a 4mm deep...
Wotofo, in collaboration with JMT Elite presents the Warrior 25mm Bottom Fed RDA, a clamp style, two post build deck rebuildable atomizer with four top-mounted Phillips screws, a 4mm deep juice well, and a fully adjustable beehive style airflow. The clamp style two post build deck features two 3.5mm by 6mm terminals that are secured by two Phillips screws. The Warrior has a 4mm juice well and an included single coil build adapter and a 510 drip tip adapter for added versatility. The stainless steel top cap has a fully adjustable beehive style airflow with 24 airflow slots, measuring 1mm each. The Warrior has a pre-installed 24K gold plated squonk pin, and an included 24K gold plated standard pin. The Warrior comes with one knurled 810 Delrin drip tip and one 810 resin drip tip each measuring at 11mm Bore. The Wotofo x JMT Elite Warrior 25mm BF RDA is a versatile RDA that has plenty of build space for the most complex speciality coils and ample adjustable airflow for user preference. 
Package Contents

 

  • One Wotofo x JMT Elite Warrior 25mm RDA
  • One Spare 810 Drip Tip
  • One 510 Drip Tip Adapter
  • One Piece Single Coil Adapter
  • Three Juggernaut Coils
    • (26+36)x2+0.1x0.4 N80
    • ID 3mm
    • 0.28 ohm
  • One Japanese Cotton
  • One Extra Spare Parts Bag
  • One Screwdriver
  • One Allen Key
  • One User Manual

 

Product Features
  • 25mm Diameter
  • Clamp Style Two Post Build Deck
    • 3.5mm by 6mm Each Terminal
      • Top Mounted Phillips Screws
    • PEEK Insulator
    • 4mm Deep Juice Well
    • Single Coil Builds
  • Beehive Style Airflow
    • 24 Airflow Slots Each Side
      • 1mm Each Airslot
  • 24K Gold Plated Bottom Feed 510 Contact
  • 11mm Bore 810 Drip Tip
  • 510 Drip Tip Adapter
Dust or wipe clean with a cloth dampened with water once a week. Be sure not to leave water spots on the surface. These water spots will dry and could possibly leave permanent marks. Clean stains/spots using the following steps: Dampen a soft cloth with a mixture of hot water and liquid dishwashing detergent. Wring the cloth as much as possible to remove excess liquid. Rub the surface lightly in a circular motion. Dry the surface immediately with a clean, soft towel.